{"title":"Engine","description":null,"products":[{"product_id":"feuling-oil-pump-corp-dipstick-vented-pol18-m8-sftl","title":"Feuling Oil Pump Corp. Dipstick Vented Pol18+m8 Sftl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED POL18+M8 SFTL\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190511575206,"sku":"0710-0261","price":505.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/363F6EA1-7187-478D-B1B1-A8F70499221D.png?v=1787764059"},{"product_id":"feuling-oil-pump-corp-dipstick-vented-blk18-m8-sftl","title":"Feuling Oil Pump Corp. Dipstick Vented Blk18+m8 Sftl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED BLK18+M8 SFTL\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190511607974,"sku":"0710-0262","price":505.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/1CD7502D-C64A-49F7-A483-FEF76AA76DE7.png?v=1787764064"},{"product_id":"feuling-oil-pump-corp-dipstick-vented-pol6-17-t-c-dyna","title":"Feuling Oil Pump Corp. Dipstick Vented Pol6-17 T\/c Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED POL6-17 T\/C DYNA\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190511673510,"sku":"0710-0263","price":505.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/CA47A3AD-5392-4E24-8B1A-08B6C2210CAB.png?v=1787764071"},{"product_id":"feuling-oil-pump-corp-dipstick-vented-blk6-17-t-c-dyan","title":"Feuling Oil Pump Corp. Dipstick Vented Blk6-17 T\/c Dyan","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED BLK6-17 T\/C DYAN\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190511706278,"sku":"0710-0264","price":505.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/E2714CA6-832E-4A41-92FC-7BBE592BBF08.png?v=1787764074"},{"product_id":"feuling-oil-pump-corp-dipstick-vented-pol6-17-t-c-tour","title":"Feuling Oil Pump Corp. Dipstick Vented Pol6-17 T\/c Tour","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED POL6-17 T\/C TOUR\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190512820390,"sku":"0710-0265","price":505.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/410adfbf-06d0-4540-8fb7-801c2a1792f5.png?v=1787764077"},{"product_id":"feuling-oil-pump-corp-dipstick-vented-blk6-17-t-c-tour","title":"Feuling Oil Pump Corp. Dipstick Vented Blk6-17 T\/c Tour","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eDIPSTICK VENTED BLK6-17 T\/C TOUR\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eBillet dipsticks vent\/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve\u003c\/li\u003e\n\u003cli\u003eScrews into the factory oil fill spout as a stock replacement part\u003c\/li\u003e\n\u003cli\u003eRemoves unwanted build-up of blow by pressure in the oil tank\u003c\/li\u003e\n\u003cli\u003eBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank\u003c\/li\u003e\n\u003cli\u003eFueling test results show a decrease in engine oil sump levels, more freely\/smoothe revving engine and increased MPG and decreased blowby\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright\u003c\/li\u003e\n\u003cli\u003eThis dipstick does get hot, use a glove when checking oil level.\u003c\/li\u003e\n\u003cli\u003eIncludes 2 different venting style options for installing the dipstick: option 1 - 1\/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element\u003c\/li\u003e\n\u003cli\u003eIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot\u003c\/li\u003e\n\u003cli\u003eThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"FEULING OIL PUMP CORP.","offers":[{"title":"Default Title","offer_id":57190512853158,"sku":"0710-0266","price":505.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/0ef792c7-c23a-42cf-a46e-fa488c98c663.png?v=1787764081"},{"product_id":"s-s-cycle-07-16-flht-engine-t111-wrk-blk","title":"S\u0026s Cycle 07-16 Flht Engine T111 Wrk\/blk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e07-16 FLHT ENGINE T111 WRK\/BLK\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCylinder heads on this engine is specially machined to compensate for the non-stock cylinder length. As a result, it is compatible with the manifold and throttle body with stock length intake runners. In addition, the breather vent bolt location has been adjusted so it is in the stock location, so stock style air cleaner back plates will bolt up to this engine.\u003c\/li\u003e\n\u003cli\u003eSuper Stock™ heads and crankcase\u003c\/li\u003e\n\u003cli\u003eEasy start 585 gear drive cams with redesigned cam cover\u003c\/li\u003e\n\u003cli\u003eTC3 oil pump and cam plate\u003c\/li\u003e\n\u003cli\u003eIntake system not included; compatible with stock or aftermarket intake systems.\u003c\/li\u003e\n\u003cli\u003eCylinder heads on T-Series long block engines are '99-'05 style. Owners of '06 models will need to purchase a set of '99-'05 style, offset intake flanges.\u003c\/li\u003e\n\u003cli\u003eRevised oil routing on '99-'06 Touring models make it so an oil line installation kit is no longer required.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190959710374,"sku":"0901-0238","price":13155.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/84A4B39B-DECB-4779-865B-B02035FCB304.png?v=1787766906"},{"product_id":"s-s-cycle-engine-assembled-t124-w-o-06-17-fxd","title":"S\u0026s Cycle Engine, Assembled, T124, W\/o 06-17 Fxd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eEngine, Assembled, T124, w\/o 06-17 FXD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eHigh compression\u003c\/li\u003e\n\u003cli\u003eNo fuel system or ignition systems included\u003c\/li\u003e\n\u003cli\u003eSpecial head machining fits stock length intake manifolds (S\u0026amp;S manifold size 410)\u003c\/li\u003e\n\u003cli\u003eStock style breathing system; compatible with stock and most performance air cleaners\u003c\/li\u003e\n\u003cli\u003eIncludes Super Stock™ heads, crankcase, high flow oil pump, cam cover, and easy start 640 gear drive cams\u003c\/li\u003e\n\u003cli\u003eOil line installation kit required\u003c\/li\u003e\n\u003cli\u003eCylinder heads on this engine are specially machined to compensate for the non-stock cylinder length. As a result, it is compatible with the manifold and the throttle body with stock length intake runners. In addition, the breather vent bolt location has been adjusted so it is in the stock location, so stock style air cleaner back plates will bolt up to this engine.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190959906982,"sku":"0901-0241","price":13822.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/99BDA654-96ED-432A-8479-F50B9767BC4B.png?v=1787766908"},{"product_id":"s-s-cycle-engine-t111lb-blk-99-06","title":"S\u0026s Cycle Engine T111lb Blk 99-06","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eENGINE T111LB BLK 99-06\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCylinder heads on T-Series long block engines are '99-'05 style. Owners of '06 models will need to purchase a set of '99-'05 style, offset intake flanges.\u003c\/li\u003e\n\u003cli\u003eCylinder heads on this engine is specially machined to compensate for the non-stock cylinder length. As a result, it is compatible with the manifold and throttle body with stock length intake runners. In addition, the breather vent bolt location has been adjusted so it is in the stock location, so stock style air cleaner back plates will bolt up to this engine.\u003c\/li\u003e\n\u003cli\u003eSuper Stock™ heads and crankcase\u003c\/li\u003e\n\u003cli\u003eEasy start 585 gear drive cams with redesigned cam cover\u003c\/li\u003e\n\u003cli\u003eTC3 oil pump and cam plate\u003c\/li\u003e\n\u003cli\u003eIntake system not included; compatible with stock or aftermarket intake systems.\u003c\/li\u003e\n\u003cli\u003eRevised oil routing on '99-'06 Touring models make it so an oil line installation kit is no longer required.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190960136358,"sku":"0901-0242","price":13340.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/99BDA654-96ED-432A-8479-F50B9767BC4B_d9fc6823-5c91-4281-b284-dffe454348bb.png?v=1787766910"},{"product_id":"s-s-cycle-engine-t124lclb-blk-07-16","title":"S\u0026s Cycle Engine T124lclb Blk 07-16","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eENGINE T124LCLB BLK 07-16\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines.\u003c\/li\u003e\n\u003cli\u003eIncludes Super Stock™ heads, T2 crankcase, high flow oil pump, cam cover and easy start 585 gear drive cams\u003c\/li\u003e\n\u003cli\u003eNo fuel system or ignition systems included.\u003c\/li\u003e\n\u003cli\u003eSpecial head machining fits stock length intake manifolds (S\u0026amp;S manifold size 405)\u003c\/li\u003e\n\u003cli\u003eStock style breathing system; compatible with stock and most performance air cleaners\u003c\/li\u003e\n\u003cli\u003eCylinder heads on T-Series long block engines are '99 - '05 style. Owners of '06 models will need to purchase a set of '99 - '05 style, offset intake flanges.\u003c\/li\u003e\n\u003cli\u003eRevised oil routing on '99-'06 Touring models make it so an oil line istallation kit is no longer required.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190960365734,"sku":"0901-0248","price":13630.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/018935E5-FBE9-40AD-A27D-0A0194CA7DA9.png?v=1787766913"},{"product_id":"s-s-cycle-07-16-flht-t124-engine-wo-induc-ign-lc-cam-st-gray-chr","title":"S\u0026s Cycle 07-16 Flht T124\" Engine Wo\/ Induc\/ign,lc Cam St Gray ,chr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e07-16 FLHT T124\" ENGINE WO\/ INDUC\/IGN,LC CAM ST GRAY ,CHR\u003c\/p\u003e","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190960758950,"sku":"0901-0252","price":13630.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/63537thm_6e09ce7363cefc0.jpg?v=1787766916"},{"product_id":"s-s-cycle-eng-t124-wo-indc-ign-lc-585ge-cams-slvr-99-06-bt-not-06-dyna","title":"S\u0026s Cycle Eng T124 Wo Indc\/ign Lc 585ge Cams Slvr 99-06 Bt Not 06 Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eENG T124 WO INDC\/IGN LC 585GE CAMS SLVR 99-06 BT NOT 06 DYNA\u003c\/p\u003e","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190960890022,"sku":"0901-0254","price":13822.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/63538scr_1df9ce4daae8b32.jpg?v=1787766918"},{"product_id":"s-s-cycle-engine-mk136-black-oil-cooled-550g-cam-wblack-2017-up-m8","title":"S\u0026s Cycle Engine Mk136 Black Oil Cooled 550g Cam Wblack 2017-up M8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eENGINE MK136 BLACK OIL COOLED 550G CAM WBLACK 2017-UP M8\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCylinder Heads:\u003c\/li\u003e\n\u003cli\u003eHigh-flow cylinder heads with premium seats, guides, valves, springs, and seals\u003c\/li\u003e\n\u003cli\u003e+1.00 mm oversized intake and exhaust valves\u003c\/li\u003e\n\u003cli\u003eValves are 0.030\" longer than stock for improved valvetrain geometry\u003c\/li\u003e\n\u003cli\u003e0.605\" max lift valve spring\u003c\/li\u003e\n\u003cli\u003eEnlarged cooling passage around the exhaust seats\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S exclusive breather boxes\u003c\/li\u003e\n\u003cli\u003eCrankcase:\u003c\/li\u003e\n\u003cli\u003ePatented dual-spray piston cooling jets\u003c\/li\u003e\n\u003cli\u003ePrecision machined oil scraper\u003c\/li\u003e\n\u003cli\u003eEnlarged oil sump\u003c\/li\u003e\n\u003cli\u003eContoured floor allows oil to easily drain back to the sump\u003c\/li\u003e\n\u003cli\u003eMK136:\u003c\/li\u003e\n\u003cli\u003eRetains stock engine height\u003c\/li\u003e\n\u003cli\u003eIncludes forged pistons, S\u0026amp;S performance oil pump and cam support plate, premiun tappets and tappet cuffs, billet aluminum covers, sprocket shaft spacer, Champion spark plugs and cam cover badge\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e550G gear drive cam\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190961021094,"sku":"0901-0264","price":19296.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/CDCDD24C-7B22-46C7-BAD4-115D2E5255B2.png?v=1787766921"},{"product_id":"s-s-cycle-engine-mk136-black-oil-cooled-475g-cam-wblack-2017-up-m8","title":"S\u0026s Cycle Engine Mk136 Black Oil Cooled 475g Cam Wblack 2017-up M8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eENGINE MK136 BLACK OIL COOLED 475G CAM WBLACK 2017-UP M8\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCylinder Heads:\u003c\/li\u003e\n\u003cli\u003eHigh-flow cylinder heads with premium seats, guides, valves, springs, and seals\u003c\/li\u003e\n\u003cli\u003e+1.00 mm oversized intake and exhaust valves\u003c\/li\u003e\n\u003cli\u003eValves are 0.030\" longer than stock for improved valvetrain geometry\u003c\/li\u003e\n\u003cli\u003e0.605\" max lift valve spring\u003c\/li\u003e\n\u003cli\u003eEnlarged cooling passage around the exhaust seats\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S exclusive breather boxes\u003c\/li\u003e\n\u003cli\u003eCrankcase:\u003c\/li\u003e\n\u003cli\u003ePatented dual-spray piston cooling jets\u003c\/li\u003e\n\u003cli\u003ePrecision machined oil scraper\u003c\/li\u003e\n\u003cli\u003eEnlarged oil sump\u003c\/li\u003e\n\u003cli\u003eContoured floor allows oil to easily drain back to the sump\u003c\/li\u003e\n\u003cli\u003eMK136:\u003c\/li\u003e\n\u003cli\u003eRetains stock engine height\u003c\/li\u003e\n\u003cli\u003eIncludes forged pistons, S\u0026amp;S performance oil pump and cam support plate, premiun tappets and tappet cuffs, billet aluminum covers, sprocket shaft spacer, Champion spark plugs and cam cover badge\u003c\/li\u003e\n\u003cli\u003e475G gear drive cam\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190961053862,"sku":"0901-0265","price":19296.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/26026720-EB7D-4093-8891-E1816E8DA69E.png?v=1787766924"},{"product_id":"wiseco-piston-99-06-twncam-88bigbore-10-5-1-cr-3875vm","title":"Wiseco Piston 99-06 Twncam 88bigbore 10.5:1 Cr 3875vm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e99-06 TWNCAM 88BIGBORE 10.5:1 CR 3875VM\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged from high-silicon aluminum alloy for maximum strength and dependability\u003c\/li\u003e\n\u003cli\u003eKit includes pistons, retainer clips, chrome piston pins, top end gasket kit, and VM-Rings package (1.2 mm steel, positive twist, gas nitrided top ring, 1.2 mm cast iron, taper under-hook scraper ring and 2.0 mm three piece, flex vent oil ring with steel chrome-faced rails); VMF- Ring package includes 3.0 mm oil ring instead of 2.0 mm oil ring\u003c\/li\u003e\n\u003cli\u003eTwin Cam pistons have Armor Plating which improves ring seal, eliminates ring micro-welding and improves the piston's ability to defend against detonation damage\u003c\/li\u003e\n\u003cli\u003eWiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings.\u003c\/li\u003e\n\u003cli\u003ePistons are made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190962069670,"sku":"0903-0787","price":1159.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/CA6E90FC-F765-4154-9E72-E3408457796A.png?v=1787766940"},{"product_id":"wiseco-piston-99-06-twncam-88bigbore-10-5-1-cr-3885vm","title":"Wiseco Piston 99-06 Twncam 88bigbore 10.5:1 Cr 3885vm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e99-06 TWNCAM 88BIGBORE 10.5:1 CR 3885VM\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged from high-silicon aluminum alloy for maximum strength and dependability\u003c\/li\u003e\n\u003cli\u003eKit includes pistons, retainer clips, chrome piston pins, top end gasket kit, and VM-Rings package (1.2 mm steel, positive twist, gas nitrided top ring, 1.2 mm cast iron, taper under-hook scraper ring and 2.0 mm three piece, flex vent oil ring with steel chrome-faced rails); VMF- Ring package includes 3.0 mm oil ring instead of 2.0 mm oil ring\u003c\/li\u003e\n\u003cli\u003eTwin Cam pistons have Armor Plating which improves ring seal, eliminates ring micro-welding and improves the piston's ability to defend against detonation damage\u003c\/li\u003e\n\u003cli\u003eWiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings.\u003c\/li\u003e\n\u003cli\u003ePistons are made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190962102438,"sku":"0903-0789","price":1159.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/E61F6D6F-8473-42C2-9C8F-4EA579C7F0A6.png?v=1787766942"},{"product_id":"wiseco-piston-99-06-hd-tc-big-bore-flat-top-3875vm","title":"Wiseco Piston 99-06 Hd Tc Big Bore Flat Top 3875vm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e99-06 HD TC BIG BORE FLAT TOP 3875VM\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged from high-silicon aluminum alloy for maximum strength and dependability\u003c\/li\u003e\n\u003cli\u003eKit includes pistons, retainer clips, chrome piston pins, top end gasket kit, and VM-Rings package (1.2 mm steel, positive twist, gas nitrided top ring, 1.2 mm cast iron, taper under-hook scraper ring and 2.0 mm three piece, flex vent oil ring with steel chrome-faced rails); VMF- Ring package includes 3.0 mm oil ring instead of 2.0 mm oil ring\u003c\/li\u003e\n\u003cli\u003eTwin Cam pistons have Armor Plating which improves ring seal, eliminates ring micro-welding and improves the piston's ability to defend against detonation damage\u003c\/li\u003e\n\u003cli\u003eWiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings.\u003c\/li\u003e\n\u003cli\u003ePistons are made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190962135206,"sku":"0903-0791","price":1159.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/9D015749-27AC-4799-8A68-DCC967CDA7A3.png?v=1787766945"},{"product_id":"s-s-cycle-cylinder-kt-883-1200-slvr-86-19-xl","title":"S\u0026s Cycle Cylinder Kt 883-1200 Slvr 86-19 Xl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eCYLINDER KT 883-1200 SLVR 86-19 XL\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eSaves time because pistons already fit to the cylinders - ready to assemble out of the box\u003c\/li\u003e\n\u003cli\u003eCylinders are constructed from premium aluminum castings with cast-in iron liners\u003c\/li\u003e\n\u003cli\u003eNo machining\u003c\/li\u003e\n\u003cli\u003eNo re-balancing of 883 cc flywheels\u003c\/li\u003e\n\u003cli\u003eNo cylinder head modifications\u003c\/li\u003e\n\u003cli\u003eKit includes cylinders, pistons with 11.2 cc dish volume, rings and gaskets (head, base and exhaust)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMust be used with 883 heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962167974,"sku":"0903-0944","price":1824.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/8A4A6421-0E29-4A55-860E-3DCD53BD050F.png?v=1787766948"},{"product_id":"s-s-cycle-cylinder-kt-883-1200-blk-86-19-xl","title":"S\u0026s Cycle Cylinder Kt 883-1200 Blk 86-19 Xl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eCYLINDER KT 883-1200 BLK 86-19 XL\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eSaves time because pistons already fit to the cylinders - ready to assemble out of the box\u003c\/li\u003e\n\u003cli\u003eCylinders are constructed from premium aluminum castings with cast-in iron liners\u003c\/li\u003e\n\u003cli\u003eNo machining\u003c\/li\u003e\n\u003cli\u003eNo re-balancing of 883 cc flywheels\u003c\/li\u003e\n\u003cli\u003eNo cylinder head modifications\u003c\/li\u003e\n\u003cli\u003eKit includes cylinders, pistons with 11.2 cc dish volume, rings and gaskets (head, base and exhaust)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMust be used with 883 heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962266278,"sku":"0903-0945","price":1824.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/D2D83666-E87E-45BC-8563-8307054A2A65.png?v=1787766950"},{"product_id":"s-s-cycle-kit-hsu-124-07-17-tca-blk","title":"S\u0026s Cycle Kit Hsu 124\" 07-17 Tca Blk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eKIT HSU 124\" 07-17 TCA BLK\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eConverts a stock engine to 124\" using the stock crankcases\u003c\/li\u003e\n\u003cli\u003eFuel or ignition system not included.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eAlthough the engine is 0.960\" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.\u003c\/li\u003e\n\u003cli\u003eEFI system must be recalibrated.\u003c\/li\u003e\n\u003cli\u003eAll clearances and assembly specifications will need to be checked.\u003c\/li\u003e\n\u003cli\u003eFor non-balanced Twin Cam models\u003c\/li\u003e\n\u003cli\u003eInclude S\u0026amp;S Super Stock® 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S\u0026amp;S 4.625” stroke flywheel assembly, S\u0026amp;S 640 gear drive Easy Start cams, S\u0026amp;S premium tappets, S\u0026amp;S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962299046,"sku":"0903-0951","price":9687.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/75846580-88CA-49E2-90BD-37AF36645338.png?v=1787766953"},{"product_id":"wiseco-piston-piston-kit-w-gaskets","title":"Wiseco Piston Piston Kit W\/gaskets","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTON KIT W\/GASKETS\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged from high-silicon aluminum alloy for maximum strength and dependability\u003c\/li\u003e\n\u003cli\u003eKit includes pistons, retainer clips, chrome piston pins, top end gasket kit, and VM-Rings package (1.2 mm steel, positive twist, gas nitrided top ring, 1.2 mm cast iron, taper under-hook scraper ring and 2.0 mm three piece, flex vent oil ring with steel chrome-faced rails); VMF- Ring package includes 3.0 mm oil ring instead of 2.0 mm oil ring\u003c\/li\u003e\n\u003cli\u003eTwin Cam pistons have Armor Plating which improves ring seal, eliminates ring micro-welding and improves the piston's ability to defend against detonation damage\u003c\/li\u003e\n\u003cli\u003eWiseco pistons that use VM-rings can only be fitted with Wiseco VM-rings.\u003c\/li\u003e\n\u003cli\u003ePistons are made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190962364582,"sku":"0903-1170","price":1209.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/B72E1DF2-D50E-4489-A114-8AFF660869A8.png?v=1787766955"},{"product_id":"s-s-cycle-head-kit-4-1-8-bore-stock-bolt-pattern-650-steel-w-o-c","title":"S\u0026s Cycle Head, Kit, 4-1\/8\" Bore, Stock Bolt Pattern,.650\" Steel,w\/o C","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003e2018 FAT BOOK UPDATE FITS 08-17 TOURING MODELS EXC TWIN COOLED MODELS.\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned specifically for S\u0026amp;S® T-Series T2 long block engines for Harley Davidson® big twins and engines with S\u0026amp;S® 4-1\/4\" bore Hot Set Up installed\u003c\/li\u003e\n\u003cli\u003e2.000\" intake and 1.605\" exhaust valves coupled with S\u0026amp;S® ports, supply plenty of air for these big motors\u003c\/li\u003e\n\u003cli\u003eManifold mounting surface is machined to stock dimensions\u003c\/li\u003e\n\u003cli\u003eA special manifold\/throttle body is required for engines that are not stock height.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S® High performance valve springs allow the installation of camshafts with up to .650\" lift\u003c\/li\u003e\n\u003cli\u003eCompatible with stock rocker boxes, exhaust, and intake manifolds\u003c\/li\u003e\n\u003cli\u003eNot machined for compression releases.\u003c\/li\u003e\n\u003cli\u003eMust use S\u0026amp;S valve cover gasket kit with stock rocker covers.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNot compatible with '14-'16 FLHTK\/FLHTKL, FLHTCUTG Twin-Cooled motors or '17 touring models.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962430118,"sku":"0903-1292","price":2448.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/2A91736B-2F75-4959-AD48-EFDA1F1C720F.png?v=1787766957"},{"product_id":"s-s-cycle-hot-set-up-kit-big-bore-106-w-o-heads-w-cylinders-pisto","title":"S\u0026s Cycle Hot Set Up Kit, Big Bore, 106\", W\/o Heads,w\/ Cylinders Pisto","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePlease note that this does not fit the 2009 Sportster 1200C\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eIncrease bore size from 3.750\" to 3.927\"\u003c\/li\u003e\n\u003cli\u003e4.375\" stroke, 10.0:1 compression with stock heads\u003c\/li\u003e\n\u003cli\u003eEasy installation; no machining or rebalancing required\u003c\/li\u003e\n\u003cli\u003eForged coated pistons are compatible with stock or S\u0026amp;S Super Stock 79cc and 89cc heads\u003c\/li\u003e\n\u003cli\u003eValve pocket recessed in S\u0026amp;S pistons are enlarged for oversize valves and higher lift cams\u003c\/li\u003e\n\u003cli\u003e11 fins and full fin pattern on cam side of cylinders closely resembles OEM shape\u003c\/li\u003e\n\u003cli\u003eKit includes; S\u0026amp;S cylinders with gaskets, piston set with rings, top end gasket kit, pushrods, tappets, 585CE chain-drive easy start cams and instructions\u003c\/li\u003e\n\u003cli\u003eA fuel system is not included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncreased fin area for better heat dissipation\u003c\/li\u003e\n\u003cli\u003eEFI system must be recalibrated.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962462886,"sku":"0903-1293","price":2923.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/F499DE28-E1FE-4BBA-A4AA-3A14BEC98E05.png?v=1787766959"},{"product_id":"s-s-cycle-hooligan-kit-1200cc-to-1250cc-black-00-19-xl-883","title":"S\u0026s Cycle Hooligan Kit,1200cc To 1250cc,black,00-'19 Xl 883","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePLEASE NOTE THIS IS A BLACK KIT.\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCams are .482\" lift and 240° duration intake and 234° duration exhaust\u003c\/li\u003e\n\u003cli\u003eCompression ratios: 9.6:1 for 1200cc kit and 11.2:1 for 1250cc kit\u003c\/li\u003e\n\u003cli\u003eUse stock heads, pushrods, and fuel system\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962495654,"sku":"0903-1301","price":2485.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/BC1486E0-4B1B-4C9C-8A26-4FDEC7750E0E.png?v=1787766962"},{"product_id":"s-s-cycle-hooligan-kit-1200cc-to-1250cc-silver-00-19-xl-1200","title":"S\u0026s Cycle Hooligan Kit,1200cc To 1250cc,silver,00-'19 Xl 1200","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eHooligan Kit,1200cc to 1250cc,Silver,00-'19 XL 1200\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCams are .482\" lift and 240° duration intake and 234° duration exhaust\u003c\/li\u003e\n\u003cli\u003eCompression ratios: 9.6:1 for 1200cc kit and 11.2:1 for 1250cc kit\u003c\/li\u003e\n\u003cli\u003eUse stock heads, pushrods, and fuel system\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190962528422,"sku":"0903-1303","price":2485.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/13296589-93C1-48D4-8DFF-E123EDF15E02.png?v=1787766964"},{"product_id":"wiseco-piston-pistn-kt-milwaukee8-107ci","title":"Wiseco Piston Pistn Kt Milwaukee8 107ci","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT MILWAUKEE8 107CI\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFeatures ArmorX™ piston coating for superior protection in extreme conditions and reduced wear\u003c\/li\u003e\n\u003cli\u003eArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation\u003c\/li\u003e\n\u003cli\u003eDome design for improved flame travel to maximize air\/ fuel burn efficiency\u003c\/li\u003e\n\u003cli\u003eHigh compression (11:1) for added power\u003c\/li\u003e\n\u003cli\u003eSuperfinish piston pin reduces friction and improves scuff resistance\u003c\/li\u003e\n\u003cli\u003eEnhanced pin oiling for improved lubrication and reduced friction\u003c\/li\u003e\n\u003cli\u003eAugmented ring land details improve ring seal and function\u003c\/li\u003e\n\u003cli\u003eDedicated rings for precise fit, improved compression and oil control\u003c\/li\u003e\n\u003cli\u003eFits OEM and Screamin’ Eagle cylinder heads.\u003c\/li\u003e\n\u003cli\u003eKit includes two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190962561190,"sku":"0903-1551","price":934.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/ECBC42C7-83E7-4D69-AB00-3C2F1FA67F01.png?v=1787766966"},{"product_id":"wiseco-piston-pistn-kt-milwaukee8-114ci","title":"Wiseco Piston Pistn Kt Milwaukee8 114ci","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT MILWAUKEE8 114CI\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFeatures ArmorX™ piston coating for superior protection in extreme conditions and reduced wear\u003c\/li\u003e\n\u003cli\u003eArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation\u003c\/li\u003e\n\u003cli\u003eDome design for improved flame travel to maximize air\/ fuel burn efficiency\u003c\/li\u003e\n\u003cli\u003eHigh compression (11:1) for added power\u003c\/li\u003e\n\u003cli\u003eSuperfinish piston pin reduces friction and improves scuff resistance\u003c\/li\u003e\n\u003cli\u003eEnhanced pin oiling for improved lubrication and reduced friction\u003c\/li\u003e\n\u003cli\u003eAugmented ring land details improve ring seal and function\u003c\/li\u003e\n\u003cli\u003eDedicated rings for precise fit, improved compression and oil control\u003c\/li\u003e\n\u003cli\u003eFits OEM and Screamin’ Eagle cylinder heads.\u003c\/li\u003e\n\u003cli\u003eKit includes two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190963478694,"sku":"0903-1552","price":934.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/90D4FB58-7988-48A3-BC6F-69D06026F17D.png?v=1787766969"},{"product_id":"wiseco-piston-pistn-kt-milwaukee8-117ci","title":"Wiseco Piston Pistn Kt Milwaukee8 117ci","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT MILWAUKEE8 117CI\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFeatures ArmorX™ piston coating for superior protection in extreme conditions and reduced wear\u003c\/li\u003e\n\u003cli\u003eArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation\u003c\/li\u003e\n\u003cli\u003eDome design for improved flame travel to maximize air\/ fuel burn efficiency\u003c\/li\u003e\n\u003cli\u003eHigh compression (11:1) for added power\u003c\/li\u003e\n\u003cli\u003eSuperfinish piston pin reduces friction and improves scuff resistance\u003c\/li\u003e\n\u003cli\u003eEnhanced pin oiling for improved lubrication and reduced friction\u003c\/li\u003e\n\u003cli\u003eAugmented ring land details improve ring seal and function\u003c\/li\u003e\n\u003cli\u003eDedicated rings for precise fit, improved compression and oil control\u003c\/li\u003e\n\u003cli\u003eFits OEM and Screamin’ Eagle cylinder heads.\u003c\/li\u003e\n\u003cli\u003eKit includes two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190963642534,"sku":"0903-1553","price":934.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/7D9B40C5-90B6-4802-8A0E-5258E8CC267E.png?v=1787766971"},{"product_id":"wiseco-piston-pistn-kt-milwaukee8-124ci","title":"Wiseco Piston Pistn Kt Milwaukee8 124ci","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT MILWAUKEE8 124CI\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFeatures ArmorX™ piston coating for superior protection in extreme conditions and reduced wear\u003c\/li\u003e\n\u003cli\u003eArmorFit™ skirt coating auto-adjusts to the cylinder wall so there’s no need to measure clearance; provides smooth, quiet, trouble-free operation\u003c\/li\u003e\n\u003cli\u003eDome design for improved flame travel to maximize air\/ fuel burn efficiency\u003c\/li\u003e\n\u003cli\u003eHigh compression (11:1) for added power\u003c\/li\u003e\n\u003cli\u003eSuperfinish piston pin reduces friction and improves scuff resistance\u003c\/li\u003e\n\u003cli\u003eEnhanced pin oiling for improved lubrication and reduced friction\u003c\/li\u003e\n\u003cli\u003eAugmented ring land details improve ring seal and function\u003c\/li\u003e\n\u003cli\u003eDedicated rings for precise fit, improved compression and oil control\u003c\/li\u003e\n\u003cli\u003eFits OEM and Screamin’ Eagle cylinder heads.\u003c\/li\u003e\n\u003cli\u003eKit includes two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190963904678,"sku":"0903-1554","price":934.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/B2E05C6D-9824-4409-9A86-39FD85DF49B2.png?v=1787766973"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-std","title":"Wiseco Piston Pistn Kt Trkr 88-95 Std","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 STD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964134054,"sku":"0903-1558","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/0D1C2565-5BCB-4100-9E2F-0EF14B88C30A.png?v=1787766976"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-010","title":"Wiseco Piston Pistn Kt Trkr 88-95 .010","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 .010\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964265126,"sku":"0903-1559","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/6CF3083A-9F95-47E4-888F-1A369C637642.png?v=1787766980"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-020","title":"Wiseco Piston Pistn Kt Trkr 88-95 .020","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 .020\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964330662,"sku":"0903-1560","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/8CE55D99-6D9A-4925-926E-BD44F3569E02.png?v=1787766983"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-std-1","title":"Wiseco Piston Pistn Kt Trkr 88-95 Std","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 STD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964396198,"sku":"0903-1561","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/574C9CD4-F2B8-4E20-9DCA-737E11C1BEA3.png?v=1787766985"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-10","title":"Wiseco Piston Pistn Kt Trkr 88-95 .010","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 .010\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964428966,"sku":"0903-1562","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/A86364D6-43A3-4DA0-ACC9-B70C95F27E8C.png?v=1787766987"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-95-20","title":"Wiseco Piston Pistn Kt Trkr 88-95 .020","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-95 .020\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964461734,"sku":"0903-1563","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/A86364D6-43A3-4DA0-ACC9-B70C95F27E8C_35b1a758-fa8f-415b-b623-bb10e4fea2fd.png?v=1787766990"},{"product_id":"wiseco-piston-pistn-kt-trkr-88-97-std","title":"Wiseco Piston Pistn Kt Trkr 88-97 Std","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 88-97 STD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964494502,"sku":"0903-1564","price":569.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/C477DAF5-E566-480F-BEF3-4ED32093C60D.png?v=1787766992"},{"product_id":"wiseco-piston-pistn-kt-trkr-96-103-std","title":"Wiseco Piston Pistn Kt Trkr 96-103 Std","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 96-103 STD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964625574,"sku":"0903-1565","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/E95773C1-4B90-4FB0-B0BF-C7C46BADBDAF.png?v=1787766994"},{"product_id":"wiseco-piston-pistn-kt-trkr-96-103-010","title":"Wiseco Piston Pistn Kt Trkr 96-103 .010","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 96-103 .010\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964658342,"sku":"0903-1566","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/17A4BCDD-D7A2-4039-BAC8-702B276F88EC.png?v=1787766996"},{"product_id":"wiseco-piston-pistn-kt-trkr-96-103-020","title":"Wiseco Piston Pistn Kt Trkr 96-103 .020","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 96-103 .020\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964691110,"sku":"0903-1567","price":524.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/363F6EB4-2FD1-41DB-9D8B-2E9D5B817DC7.png?v=1787766999"},{"product_id":"s-s-cycle-00-18-xl-hooligan-kit-883-1200cc-blk","title":"S\u0026s Cycle 00-18 Xl Hooligan Kit 883\/1200cc Blk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eCUSTOM ORDER ONLY, CONTACT CUSTOMER SERVICE FOR CURRENT PRICING AND LEAD TIME\u003c\/p\u003e","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190964723878,"sku":"0903-1590","price":3156.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/63542scr_a6ce065d80330e8.jpg?v=1787767001"},{"product_id":"wiseco-piston-pistn-kt-trkr-96-106-std","title":"Wiseco Piston Pistn Kt Trkr 96-106 Std","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePISTN KT TRKR 96-106 STD\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eForged piston crown with generous valve pockets for big valves and cams\u003c\/li\u003e\n\u003cli\u003ePrecision-fit rings selected for each application for ultimate sealing\u003c\/li\u003e\n\u003cli\u003eForce-fed pin oiling provides enhanced lubrication of the piston pin\u003c\/li\u003e\n\u003cli\u003ePressure seal groove reduces ring lifting and power loss\u003c\/li\u003e\n\u003cli\u003eArmorGlide® skirt coating reduces friction, providing quieter operation and improving scuff resistance\u003c\/li\u003e\n\u003cli\u003eValued-packaged with two pistons, rings, piston pins and circlips\u003c\/li\u003e\n\u003cli\u003ePiston is made in the USA\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"WISECO PISTON","offers":[{"title":"Default Title","offer_id":57190964756646,"sku":"0903-1594","price":569.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/27B7339B-0EE8-4322-8AFC-C1F2A456B536.png?v=1787767004"},{"product_id":"s-s-cycle-powr-pk-4bore-silv-585ce-99-06-exc-06-dyna","title":"S\u0026s Cycle Powr Pk, 4\"bore, Silv, 585ce, 99-06 Exc 06 Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, silv, 585CE, 99-06 exc 06 dyna\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTC3 Cam Support Plate and TC3 Oil Pump\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 4.000\" Big-Bore Cylinders, Piston Kits, S\u0026amp;S 585 Easy Start® Cams, S\u0026amp;S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit\u003c\/li\u003e\n\u003cli\u003eNot compatible with S\u0026amp;S 79 cc Super Stock® heads.\u003c\/li\u003e\n\u003cli\u003e'99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).\u003c\/li\u003e\n\u003cli\u003eNot for '06 Dyna.\u003c\/li\u003e\n\u003cli\u003eNot recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 585 Easy Start® Cam Specifications\u003c\/li\u003e\n\u003cli\u003eIntake: Open 20° \/ Close 45° \/ Duration at 0.053\" 245° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eExhaust: Open 60° \/ Close 20° \/ Duration at 0.053\" 260° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Cylinder\u003c\/li\u003e\n\u003cli\u003e2x S\u0026amp;S 4.000\" bore cylinders\u003c\/li\u003e\n\u003cli\u003eLow friction ductile cast iron liner\u003c\/li\u003e\n\u003cli\u003eBolt in\u003c\/li\u003e\n\u003cli\u003eNo maching, balancing, or splitting the crankcase\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads\u003c\/li\u003e\n\u003cli\u003eIncrease displacement from 88 ci to 100 ci\u003c\/li\u003e\n\u003cli\u003ePiston Kit\u003c\/li\u003e\n\u003cli\u003e2x 4.000\" pistons for front and rear\u003c\/li\u003e\n\u003cli\u003e2x 0.927\" piston pins\u003c\/li\u003e\n\u003cli\u003e4x Piston pin clips with installation tool\u003c\/li\u003e\n\u003cli\u003e2x Ring packs which includes the top, second, oil rail and expander rings\u003c\/li\u003e\n\u003cli\u003eProvides 10.5:1 compression ratio\u003c\/li\u003e\n\u003cli\u003eEnsures consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Quickee Pushrods\u003c\/li\u003e\n\u003cli\u003eAdjustable with chrome tubes\u003c\/li\u003e\n\u003cli\u003eMachined from aluminum forgings\u003c\/li\u003e\n\u003cli\u003ePrecision Hydraulic Tappets\u003c\/li\u003e\n\u003cli\u003eClose tolerances for low leak down rates\u003c\/li\u003e\n\u003cli\u003eReduced valve train noise from start to shut down\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965182630,"sku":"0904-0025","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/411BDC8E-9C7E-42F4-BDB9-493ECD874165.png?v=1787767012"},{"product_id":"s-s-cycle-powr-pk-4bore-blk-585ge-99-06-exc-06-dyna","title":"S\u0026s Cycle Powr Pk, 4\"bore, Blk, 585ge, 99-06 Exc 06 Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, blk, 585GE, 99-06 exc 06 dyna\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTC3 Cam Support Plate and TC3 Oil Pump\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 4.000\" Big-Bore Cylinders, Piston Kits, S\u0026amp;S 585 Easy Start® Cams, S\u0026amp;S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit\u003c\/li\u003e\n\u003cli\u003eNot compatible with S\u0026amp;S 79 cc Super Stock® heads.\u003c\/li\u003e\n\u003cli\u003e'99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).\u003c\/li\u003e\n\u003cli\u003eNot for '06 Dyna.\u003c\/li\u003e\n\u003cli\u003eNot recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 585 Easy Start® Cam Specifications\u003c\/li\u003e\n\u003cli\u003eIntake: Open 20° \/ Close 45° \/ Duration at 0.053\" 245° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eExhaust: Open 60° \/ Close 20° \/ Duration at 0.053\" 260° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Cylinder\u003c\/li\u003e\n\u003cli\u003e2x S\u0026amp;S 4.000\" bore cylinders\u003c\/li\u003e\n\u003cli\u003eLow friction ductile cast iron liner\u003c\/li\u003e\n\u003cli\u003eBolt in\u003c\/li\u003e\n\u003cli\u003eNo maching, balancing, or splitting the crankcase\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads\u003c\/li\u003e\n\u003cli\u003eIncrease displacement from 88 ci to 100 ci\u003c\/li\u003e\n\u003cli\u003ePiston Kit\u003c\/li\u003e\n\u003cli\u003e2x 4.000\" pistons for front and rear\u003c\/li\u003e\n\u003cli\u003e2x 0.927\" piston pins\u003c\/li\u003e\n\u003cli\u003e4x Piston pin clips with installation tool\u003c\/li\u003e\n\u003cli\u003e2x Ring packs which includes the top, second, oil rail and expander rings\u003c\/li\u003e\n\u003cli\u003eProvides 10.5:1 compression ratio\u003c\/li\u003e\n\u003cli\u003eEnsures consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Quickee Pushrods\u003c\/li\u003e\n\u003cli\u003eAdjustable with chrome tubes\u003c\/li\u003e\n\u003cli\u003eMachined from aluminum forgings\u003c\/li\u003e\n\u003cli\u003ePrecision Hydraulic Tappets\u003c\/li\u003e\n\u003cli\u003eClose tolerances for low leak down rates\u003c\/li\u003e\n\u003cli\u003eReduced valve train noise from start to shut down\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965215398,"sku":"0904-0026","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/F55F4905-B179-4B6C-B365-84B75D58314F.png?v=1787767014"},{"product_id":"s-s-cycle-powr-pk-4bore-blk-585ce-99-06-exc-06-dyna","title":"S\u0026s Cycle Powr Pk, 4\"bore, Blk, 585ce, 99-06 Exc 06 Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, blk, 585CE, 99-06 exc 06 dyna\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTC3 Cam Support Plate and TC3 Oil Pump\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 4.000\" Big-Bore Cylinders, Piston Kits, S\u0026amp;S 585 Easy Start® Cams, S\u0026amp;S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit\u003c\/li\u003e\n\u003cli\u003eNot compatible with S\u0026amp;S 79 cc Super Stock® heads.\u003c\/li\u003e\n\u003cli\u003e'99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).\u003c\/li\u003e\n\u003cli\u003eNot for '06 Dyna.\u003c\/li\u003e\n\u003cli\u003eNot recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 585 Easy Start® Cam Specifications\u003c\/li\u003e\n\u003cli\u003eIntake: Open 20° \/ Close 45° \/ Duration at 0.053\" 245° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eExhaust: Open 60° \/ Close 20° \/ Duration at 0.053\" 260° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Cylinder\u003c\/li\u003e\n\u003cli\u003e2x S\u0026amp;S 4.000\" bore cylinders\u003c\/li\u003e\n\u003cli\u003eLow friction ductile cast iron liner\u003c\/li\u003e\n\u003cli\u003eBolt in\u003c\/li\u003e\n\u003cli\u003eNo maching, balancing, or splitting the crankcase\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads\u003c\/li\u003e\n\u003cli\u003eIncrease displacement from 88 ci to 100 ci\u003c\/li\u003e\n\u003cli\u003ePiston Kit\u003c\/li\u003e\n\u003cli\u003e2x 4.000\" pistons for front and rear\u003c\/li\u003e\n\u003cli\u003e2x 0.927\" piston pins\u003c\/li\u003e\n\u003cli\u003e4x Piston pin clips with installation tool\u003c\/li\u003e\n\u003cli\u003e2x Ring packs which includes the top, second, oil rail and expander rings\u003c\/li\u003e\n\u003cli\u003eProvides 10.5:1 compression ratio\u003c\/li\u003e\n\u003cli\u003eEnsures consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Quickee Pushrods\u003c\/li\u003e\n\u003cli\u003eAdjustable with chrome tubes\u003c\/li\u003e\n\u003cli\u003eMachined from aluminum forgings\u003c\/li\u003e\n\u003cli\u003ePrecision Hydraulic Tappets\u003c\/li\u003e\n\u003cli\u003eClose tolerances for low leak down rates\u003c\/li\u003e\n\u003cli\u003eReduced valve train noise from start to shut down\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965248166,"sku":"0904-0027","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/B858EC65-485F-4E69-AC10-0F156CB71FE0.png?v=1787767017"},{"product_id":"s-s-cycle-powr-pk-4bore-blk-585ge-99-06-exc-06-dyna-1","title":"S\u0026s Cycle Powr Pk, 4\"bore Blk, 585ge, 99-06 Exc 06 Dyna","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore blk, 585GE, 99-06 exc 06 dyna\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTC3 Cam Support Plate and TC3 Oil Pump\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 4.000\" Big-Bore Cylinders, Piston Kits, S\u0026amp;S 585 Easy Start® Cams, S\u0026amp;S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit\u003c\/li\u003e\n\u003cli\u003eNot compatible with S\u0026amp;S 79 cc Super Stock® heads.\u003c\/li\u003e\n\u003cli\u003e'99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).\u003c\/li\u003e\n\u003cli\u003eNot for '06 Dyna.\u003c\/li\u003e\n\u003cli\u003eNot recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S 585 Easy Start® Cam Specifications\u003c\/li\u003e\n\u003cli\u003eIntake: Open 20° \/ Close 45° \/ Duration at 0.053\" 245° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eExhaust: Open 60° \/ Close 20° \/ Duration at 0.053\" 260° \/ Valve Lift 0.585\"\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Cylinder\u003c\/li\u003e\n\u003cli\u003e2x S\u0026amp;S 4.000\" bore cylinders\u003c\/li\u003e\n\u003cli\u003eLow friction ductile cast iron liner\u003c\/li\u003e\n\u003cli\u003eBolt in\u003c\/li\u003e\n\u003cli\u003eNo maching, balancing, or splitting the crankcase\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads\u003c\/li\u003e\n\u003cli\u003eIncrease displacement from 88 ci to 100 ci\u003c\/li\u003e\n\u003cli\u003ePiston Kit\u003c\/li\u003e\n\u003cli\u003e2x 4.000\" pistons for front and rear\u003c\/li\u003e\n\u003cli\u003e2x 0.927\" piston pins\u003c\/li\u003e\n\u003cli\u003e4x Piston pin clips with installation tool\u003c\/li\u003e\n\u003cli\u003e2x Ring packs which includes the top, second, oil rail and expander rings\u003c\/li\u003e\n\u003cli\u003eProvides 10.5:1 compression ratio\u003c\/li\u003e\n\u003cli\u003eEnsures consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;S Quickee Pushrods\u003c\/li\u003e\n\u003cli\u003eAdjustable with chrome tubes\u003c\/li\u003e\n\u003cli\u003eMachined from aluminum forgings\u003c\/li\u003e\n\u003cli\u003ePrecision Hydraulic Tappets\u003c\/li\u003e\n\u003cli\u003eClose tolerances for low leak down rates\u003c\/li\u003e\n\u003cli\u003eReduced valve train noise from start to shut down\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965280934,"sku":"0904-0028","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/CCA5C506-4734-4E19-8CB4-A35F1BAC708B.png?v=1787767019"},{"product_id":"s-s-cycle-powr-pk-4bore-silv-585ce-07-17-exc-17-touring","title":"S\u0026s Cycle Powr Pk, 4\"bore, Silv, 585ce, 07-17 Exc 17 Touring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, silv, 585CE, 07-17 exc 17 touring\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eNot for any twin-cooled models.\u003c\/li\u003e\n\u003cli\u003eNot for any Trike\/Free wheeler models.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncludes an S\u0026amp;S 4\" big-bore cylinder kit with 10.5:1 pistons, S\u0026amp;S 585 Easy Start cams, S\u0026amp;S Quickee Pushrods, and Premium Hydraulic tappets to make the most of the added displacement\u003c\/li\u003e\n\u003cli\u003eTC3 cam support plate and TC3 oil pump to ensure consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eCylinder fits to piston; no machining required\u003c\/li\u003e\n\u003cli\u003eNot for use with S\u0026amp;S 79cc heads.\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965313702,"sku":"0904-0029","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/03682F06-01F6-4BD5-9382-810841EB6797.png?v=1787767021"},{"product_id":"s-s-cycle-powr-pk-4bore-blk-585ce-07-17-exc-17-touring","title":"S\u0026s Cycle Powr Pk, 4\"bore, Blk, 585ce, 07-17 Exc 17 Touring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, BLK, 585CE, 07-17 exc 17 touring\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eNot for any twin-cooled models.\u003c\/li\u003e\n\u003cli\u003eNot for any Trike\/Free wheeler models.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncludes an S\u0026amp;S 4\" big-bore cylinder kit with 10.5:1 pistons, S\u0026amp;S 585 Easy Start cams, S\u0026amp;S Quickee Pushrods, and Premium Hydraulic tappets to make the most of the added displacement\u003c\/li\u003e\n\u003cli\u003eTC3 cam support plate and TC3 oil pump to ensure consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eCylinder fits to piston; no machining required\u003c\/li\u003e\n\u003cli\u003eNot for use with S\u0026amp;S 79cc heads.\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965444774,"sku":"0904-0030","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/11215349-9356-4D24-B985-F2FDE2BEB37D.png?v=1787767024"},{"product_id":"s-s-cycle-powr-pk-4bore-silver-585ge-07-17-exc-17-touring","title":"S\u0026s Cycle Powr Pk, 4\"bore, Silver, 585ge, 07-17 Exc 17 Touring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, SILVER, 585GE, 07-17 exc 17 touring\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eNot for any twin-cooled models.\u003c\/li\u003e\n\u003cli\u003eNot for any Trike\/Free wheeler models.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncludes an S\u0026amp;S 4\" big-bore cylinder kit with 10.5:1 pistons, S\u0026amp;S 585 Easy Start cams, S\u0026amp;S Quickee Pushrods, and Premium Hydraulic tappets to make the most of the added displacement\u003c\/li\u003e\n\u003cli\u003eTC3 cam support plate and TC3 oil pump to ensure consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eCylinder fits to piston; no machining required\u003c\/li\u003e\n\u003cli\u003eNot for use with S\u0026amp;S 79cc heads.\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965477542,"sku":"0904-0031","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/B1AD4632-724A-492B-9564-3DDD63C77623.png?v=1787767026"},{"product_id":"s-s-cycle-powr-pk-4bore-blk-585ge-07-17-exc-17-touring","title":"S\u0026s Cycle Powr Pk, 4\"bore, Blk, 585ge, 07-17 Exc 17 Touring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003ePowr Pk, 4\"bore, blk, 585GE, 07-17 exc 17 touring\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eNot for any twin-cooled models.\u003c\/li\u003e\n\u003cli\u003eNot for any Trike\/Free wheeler models.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIncludes an S\u0026amp;S 4\" big-bore cylinder kit with 10.5:1 pistons, S\u0026amp;S 585 Easy Start cams, S\u0026amp;S Quickee Pushrods, and Premium Hydraulic tappets to make the most of the added displacement\u003c\/li\u003e\n\u003cli\u003eTC3 cam support plate and TC3 oil pump to ensure consistent oil pressure and engine longevity\u003c\/li\u003e\n\u003cli\u003eCylinder fits to piston; no machining required\u003c\/li\u003e\n\u003cli\u003eNot for use with S\u0026amp;S 79cc heads.\u003c\/li\u003e\n\u003cli\u003eCan be used with stock heads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":57190965903526,"sku":"0904-0032","price":5881.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/EBC94B14-000A-433C-83FF-424BB4ED607B.png?v=1787767028"},{"product_id":"trask-tornado-performance-kit-m8-black","title":"Trask Tornado Performance Kit - M8 - Black","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n      \u003cp\u003eTornado Performance Kit - M8 - Black\u003c\/p\u003e\n    \u003ch3\u003eFeatures\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eIntended for offroad use only and recommended for experienced riders.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTrask compressor and turbine housing with Garrett internals\u003c\/li\u003e\n\u003cli\u003eBolt on 40%-50% more power for stock 107\", 114\" and 117\" M-Eight motors\u003c\/li\u003e\n\u003cli\u003eTrask plenum with integrated blow-off valve\u003c\/li\u003e\n\u003cli\u003eIncludes all install components: larger injectors, spark plugs, boost gauge with mount, oil feed, drain lines, custom cam cover, Thundermax tune files and all necessary hardware and gaskets\u003c\/li\u003e\n\u003cli\u003eRequires use of Thundermax ECM (sold separately).\u003c\/li\u003e\n\u003cli\u003eDoes not fit Twin Cooled models or models with fairing lowers that cannot be removed.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  ","brand":"TRASK","offers":[{"title":"Default Title","offer_id":57190966132902,"sku":"0904-0096","price":13075.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/3731\/8054\/files\/0F6B4219-10F9-4ACB-B688-2D19EC20EA1B.png?v=1787767031"}],"url":"https:\/\/killshiftcustoms.com\/collections\/engine.oembed","provider":"KILLSHIFT CUSTOMS","version":"1.0","type":"link"}